‧AC‧MK205RAN (79)

Dia.197x79mm / 7.8inch
590 CFM
Metal Impeller
  Rated
Volt
Voltage
Range
Freq Input
Power
Ref.
Speed
Max.Airflow Max.Static Pressure Noise
Level
PQ UL
Model No VAC VAC Hz Watt

RPM

CFM m3/min Inch/H2O mm db(A)    
MK205RAN11-1** (79) 115 100~120 50/60 60/80 2800/3000 520/590 14.7/16.7 0.91/0.86 23.11/21.84 68 2/1 £
MK205RAN11-2** (79) 115 100~120 50/60 55/65 2300/2250 450/465 12.7/13.2 0.69/0.52 17.53/13.21 57 4/3 £
MK205RAN11-3** (79) 115 100~120 50/60 20/30 1400/1600 310/330 8.8/9.3 0.38/0.29 9.65/7.37 48 6/5 £
MK205RAN11-4** (79) 115 100~120 50/60 18/25 1200/1300 240/260 6.8/7.4 0.21/0.15 5.33/3.81 35 8/7 £
MK205RAN11-1/2** (79)
Dual speed
115 100~120 50/60 60/80
55/65
2800/3000
2300/2250
520/590
450/465
14.7/16.7
12.7/13.2
0.91/0.86
0.69/0.52
23.11/21.84
17.53/13.21
68
57
£
MK205RAN11-3/4** (79)
Dual speed
115 100~120 50/60 20/30
18/25
1400/1600
1200/1300
310/330
240/260
8.8/9.3
6.8/7.4
0.38/0.29
0.21/0.15
9.65/7.37
5.33/3.81
48
35
£
MK205RAN22-1** (79) 230 200~240 50/60 60/80 2800/3000 520/590 14.7/16.7 0.91/0.86 23.11/21.84 68 2/1 £
MK205RAN22-2** (79) 230 200~240 50/60 55/65 2300/2250 450/465 12.7/13.2 0.69/0.52 17.53/13.21 57 4/3 £
MK205RAN22-3** (79) 230 200~240 50/60 20/30 1400/1600 310/330 8.8/9.3 0.38/0.29 9.65/7.37 48 6/5 £
MK205RAN22-4** (79) 230 200~240 50/60 18/25 1200/1300 240/260 6.8/7.4 0.21/0.15 5.33/3.81 35 8/7 £
MK205RAN22-1/2** (79)
Dual speed
230 200~240 50/60 60/80
55/65
2800/3000
2300/2250
520/590
450/465
14.7/16.7
12.7/13.2
0.91/0.86
0.69/0.52
23.11/21.84
17.53/13.21
68
57
£
MK205RAN22-3/4** (79)
Dual speed
230 200~240 50/60 20/30
18/25
1400/1600
1200/1300
310/330
240/260
8.8/9.3
6.8/7.4
0.38/0.29
0.21/0.15
9.65/7.37
5.33/3.81
35
35
£
MK205RAN44-1** (380)(79) 380 380~440 50/60 60/80 2700/3000 501/590 14.2/16.7 0.91/0.86 23.11/21.84 68 2/1 £
MK205RAN44-1** (440)(79) 440 380~440 50/60 60/80 2700/3000 501/590 14.2/16.7 0.91/0.86 23.11/21.84 68 2/1 £
  • The stated airflow, air pressure, noise levels are measured with housing orifice dia.: impeller Φ +1~1.5mm, at distance: approx. height of impeller + motor frame. The optimal operating data can only be depended on the installation conditions.
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
  •  
      Motor Type: Capacitor induction, 2 or 4 pole
      Burnout Protection: Thermally protected
      IP Protection: IP56
      Frame: Aluminum die cast, natural color treatment
      Impeller: Steel-sheet metal fan blades, integrantly spot welded onto rotor
      Bearing: Two high precision permanently lubricated ball bearings
      Rotation: CCW seen on rotor
      Connection: Wire lead
      Weight: 1,800g (3.97 Lbs)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output:
      Operating Temp: Ambient non-condensing -30C~+80C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: 80K hours at 45C, 50K hours at 55C, 30K hours at 65C